CLICK HERE TO ORDER
THE RICK'S BAR LIMITED EDITION
PRIVATE INVESTIGATOR 300
Watches have arrived! Shipping as ordered!
Currently only shipping to the Contiguous United States, Shipping and taxes included
$365 each
Rick's Bar Private Investigator 300 Specs
- 316L Stainless Steel case *
- 13.4 mm thick case
- 47.5 mm lug to lug
- Crown is 6.1
- Swiss Made Ronda 517 Day Date Movement (Black Day/Date Disc)
- Unidirectional ceramic bezel 120 Click
- BGW9 Luminova Dial (Day appears white and night as blue)
- BGW9 Luminova Hands (Day appears white and night as blue)
- Stainless Steel Case in satin
- Sapphire crystal with 2 layers of anti-reflective coating
- Drilled Lugs but not drilled through (as it's not possible with this case design) - Spring Pins, but the type used with drilled lugs with holes needing to be deep enough, they are very secure.
- 30 ATM Water-resistant
- Black NATO Strap as pictured below with SS Fasteners
*Lug Finishing Specification (as previous watches). All flat surfaces of the lugs are to have a uniform brushed (satin) finish. Each lug must incorporate a polished chamfer along the outer edge. This means the top surface of the lug remains fully brushed, while the angled edge on the outside of the lug is mirror-polished to create a clear reflective highlight line. The chamfer must be sharp, well-defined, and continuous from the case body to the tip of the lug. The polishing is restricted strictly to the bevel only — it must not extend onto the top surface or the vertical side wall of the lug.
Random Rob Limited Edition Specs
- 316L DLC Plated Steel case *
- 13.4 mm thick case
- 47.5 mm lug to lug
- Crown is 6.1
- Swiss Made Ronda 715li Movement
- Bi-directional ceramic bezel 120 Click
- BGW9 Luminova Dial (Day appears white and night as blue)
- BGW9 Luminova Hands (Day appears white and night as blue)
- Stainless Steel Case in satin
- Sapphire crystal with 2 layers of anti-reflective coating
- Drilled Lugs but not drilled through (as it's not possible with this case design) - Spring Pins, but the type used with drilled lugs with holes needing to be deep enough they are very secure.
- 30 ATM Water-resistant
- Black NATO Strap as pictured below with PVD Fasteners
*Lug Finishing Specification (as previous watches). All flat surfaces of the lugs are to have a uniform brushed (satin) finish. Each lug must incorporate a polished chamfer along the outer edge. This means the top surface of the lug remains fully brushed, while the angled edge on the outside of the lug is mirror-polished to create a clear reflective highlight line. The chamfer must be sharp, well-defined, and continuous from the case body to the tip of the lug. The polishing is restricted strictly to the bevel only — it must not extend onto the top surface or the vertical side wall of the lug.